Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Montgomery Homeowners
A garage door that won’t close leaves your home open to the street, and one that won’t open traps your car inside. Garage door repair in Montgomery starts at $135 and runs to $540 for most jobs, and we can usually get a technician out the same day you call. Our technicians have up to 8 years of experience working on the eight brands we handle, and they’ll tell you plainly what’s wrong before touching a tool. One call covers the door panels, the springs, the cables, and the opener, so you’re not bounced between a door guy and an opener guy. Call (888) 688-3641 and we’ll get your door moving the way it should.
Garage Door Spring Repair
Garage Door Spring Repair is the work of replacing the torsion or extension springs that carry the weight of the door, and it’s the most common call we get in Montgomery. Springs are under heavy tension and they fail without warning, usually with a loud snap that leaves the door too heavy to lift by hand. If you’ve heard that sound or your opener strains and stops halfway, stop using the door and call us. We replace the failed spring and check the rest of the hardware while we’re there. Spring repair here typically runs $160 to $305 per spring, and a matched pair is usually replaced together, so a pair costs about twice that. The written estimate sets the final price, and you approve it before we start.
Signs a Spring Is Failing
A door that opens a few inches and stops, or an opener that sounds like it’s working much harder than it used to, points to a spring losing tension. Visible gaps in a torsion spring coil are another sign. Any of these means the door should stay down until a technician looks at it.
Why Springs Are Left to the Pros
Torsion springs store enough energy to cause serious injury, and they’re the one part of a garage door we never suggest a homeowner touch. The winding process takes specific tools and a trained hand. That’s not us being careful with our business; it’s us being honest about what’s dangerous.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Door Sensor Repair
Garage Door Sensor Repair fixes the safety eyes near the floor that tell the opener something is in the way. When they’re misaligned, dirty, or wired badly, the door reverses the moment it starts to close, or refuses to close at all. It’s one of the most common reasons a door acts haunted, and one of the cheapest to fix. We test both sensors, check the wiring back to the opener, and realign or replace as needed. Sensor work usually falls inside the $110 to $290 opener repair range, and you’ll have the number before any work begins.
Common Sensor Faults
A bumped sensor, a spider web across the lens, or a sunbeam hitting the eye at the wrong angle can all trip the safety reverse. Sometimes it’s a loose wire at the opener terminal rather than the sensor itself. We check both ends before recommending a part.
What We Adjust and Replace
We realign the brackets, clean the lenses, and replace sensors that have cracked or lost their connection. Then we run the door through a full open-close cycle to confirm the reverse works. A sensor that passes the test is a sensor you can trust.
Emergency Garage Door Repair
Emergency Garage Door Repair is for the door that’s stuck open, stuck shut, hanging off one track, or making a sound you know isn’t right. In Montgomery that’s often after a storm rolls through or a car backs into the door in the driveway. Call (888) 688-3641 and we’ll get a technician out fast. Most emergency calls land in the standard repair range of $135 to $540 depending on the part that failed. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
When to Stop Using the Door
If the door is crooked in the opening, a cable is hanging loose, or the door drops fast on one side, stop pressing the button and unplug the opener. Running a damaged door can bend panels and pull the track out of the wall. Both turn a small repair into a bigger one.
What We Can Do on the First Visit
Most emergency calls are a broken spring, a snapped cable, or a door jumped off its track, and all three are fixable in one visit with the right parts on hand. If a panel or opener part has to be ordered, we’ll secure the door so your home isn’t left open and tell you exactly when we’re coming back.
Garage Door Panel Replacement
Garage Door Panel Replacement swaps out a damaged section of the door rather than the whole thing, which is often all a bent or dented door needs. If a panel is creased from impact, rusted through at the bottom, or cracked along a hinge line, replacing that section restores the look and keeps the door balanced. We match panels for Clopay and Amarr doors, along with the other makes we work on. Panel replacement typically runs $225 to $450 depending on the panel and the door model.
Single Panel vs. Full Door
One damaged section in the middle of an otherwise sound door is a panel job. If several panels are bent, the door has rusted through in multiple spots, or the style is discontinued, a full replacement may cost less over time. We’ll price both and let you decide.
Matching the Panel to Your Door
Color, profile, and window layout all have to line up so the repair doesn’t stand out from the curb. We measure the existing panel and check the door’s make and model before ordering. On Clopay and Amarr doors the match is usually straightforward.
Garage Door Maintenance
Garage Door Maintenance is the once-a-year tune-up that keeps a working door working, and it’s the cheapest way to avoid a breakdown on a morning you need to leave. We lubricate the moving parts, check the spring tension and cable condition, tighten the hardware, and test the safety reverse. It’s worth doing once a year, or before the hot Montgomery summer puts the door through a few hundred extra cycles. Maintenance visits generally fall in the $100 to $200 range with the written estimate setting the exact price.
What a Tune-Up Covers
We oil the rollers, hinges, and springs, check the track for bends and loose bolts, and test the opener’s force and travel settings. We also look at the bottom seal and weatherstripping for gaps. You get a short report on what’s fine and what’s getting close to the end of its life.
How Often to Schedule It
Once a year works for most homes. If your door cycles many times a day, or the house has an older door, twice a year is worth the small cost. Catching a frayed cable before it snaps saves the hassle of a stuck door.
Garage Door Roller Replacement
Garage Door Roller Replacement is the fix for a door that shudders, squeals, or drags as it moves up and down. Rollers wear flat spots over time, and a worn roller makes the whole door run rough and puts extra load on the opener. We replace the full set so the door tracks evenly, and check the hinges and track while we’re in there. Roller replacement usually runs $100 to $200. The written estimate comes first, so there’s no surprise on the invoice.
Steel vs. Nylon Rollers
Steel rollers are durable but louder, and they can wear the track over years of use. Nylon rollers run quieter and smoother and hold up well in a hot climate. We’ll tell you which fits your door and budget rather than pushing one as a default.
Noise and Drag Symptoms
A door that squeals on the way up or jerks near the top is often telling you the rollers are done. If one roller has seized, the door drags against the track and strains the opener motor. Replacing the set is quick and settles the noise at the source.
Commercial Garage Door Repair
Commercial Garage Door Repair covers the roll-up and overhead doors on shops, storage buildings, and small commercial buildings around Montgomery, where a door that fails shuts down the day’s work. These doors take far more cycles than a home door, so springs, cables, and operators wear out faster and need the same brand-specific care. We handle the repair side of these doors, not new commercial installation. Typical commercial repair work runs $135 to $540 depending on the part and the door size, and larger doors or heavier hardware can go higher.
Higher-Cycle Wear
A door that opens and closes dozens of times a day wears its springs and rollers much faster than a home door moved a few times. That makes regular inspection more important than repair after the fact. Catching a stretched spring early keeps the door from failing mid-shift.
Keeping a Business Door Running
We look at the operator settings, the safety devices, and the door balance on every commercial call. Getting the door balanced takes load off the motor and cuts down on repeat breakdowns. Straight answers on what needs fixing now and what can wait come standard.
Garage Door Cable Repair
Garage Door Cable Repair replaces the steel lift cables that run along the sides of the door and work with the springs to raise it. A frayed or snapped cable leaves the door hanging uneven and dangerous to operate, and it’s often the second thing to fail after a spring. We replace the cable and inspect the springs and drums that caused the wear. Cable repair typically runs $115 to $225, and the written estimate sets the final price before we start.
Reading the Warning Signs
A cable that’s frayed, kinked, or hanging slack means the door should stay put until it’s fixed. A door that lifts crooked or feels heavier on one side often points to a cable problem. These aren’t things to test by pressing the opener button again.
Why Cables Pair With Springs
Cables and springs work as a system, so a worn spring can chew through a good cable over time. When we replace a cable, we check the spring tension and the drums for wear. Fixing the cause, not just the snapped part, is what keeps the door working.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We work on the brand already on your home, which means a technician who knows where that brand tends to wear out. Clopay doors are common in Montgomery, and we know their panel and hinge assemblies well enough to match a replacement section cleanly. Amarr doors come through our shop often too, and their heavier steel panels need the right balance and spring setup. We also service Wayne Dalton doors, including the models with their own proprietary hardware, and Craftsman openers, which are built on the same platform as several others we handle.
Our full brand list runs LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That range means we diagnose the actual equipment in your garage rather than working around a brand we don’t know. It also means no incentive to steer you toward a product line we’d rather sell. Whether you have a Clopay door, a Wayne Dalton with a Craftsman opener, or any other make, we can help.
Signs You Need a Pro Right Now
- The door won’t close and reverses right away. That’s usually a sensor or a travel limit out of adjustment, and it leaves your home open until it’s fixed. A technician can sort it out the same day in most cases.
- You heard a loud snap from above the door. That’s the sound of a torsion spring breaking, and the door is now far too heavy for the opener to lift safely. Stop using it and call us.
- The door is crooked in the opening. A door sitting at an angle usually means a snapped cable or a roller off the track. Running it can bend panels and damage the track, so leave it down.
- The opener runs but the door doesn’t move. A stripped gear, a broken spring, or a disconnected trolley can all cause this. It’s a quick diagnosis once we’re on site and usually a straightforward fix.
- The door shudders, squeals, or drags. Worn rollers or a dry hinge are the usual culprits, and the noise is the door asking for attention. Left alone, it wears the opener motor faster.
Our Process, Step by Step
- 1
You call and describe the problem. We ask what the door is doing, what kind of door and opener you have, and how urgent it is. That helps us send the right technician with the right parts. Call (888) 688-3641 and we answer 24/7.
- 2
We come out and diagnose the door. The technician tests the door balance, checks the springs, cables, rollers, and track, and runs the opener through its cycle. We use a door balance check and a force test on the opener to find the root cause, not just the symptom.
- 3
You get a written estimate before any work. We explain what’s wrong in plain terms, lay out the parts and labor, and give you the price in writing. Nothing gets touched until you approve it.
- 4
We do the repair and test the result. Once you say go, the technician completes the repair and runs the door through several full cycles. We check the safety reverse and make sure the door is balanced and quiet before we leave.
- 5
We tell you what to watch for. You get a short rundown of what we replaced and what might need attention next. No pressure to add work you didn’t ask for.
How Much Does Garage Door Repair Cost in Montgomery?
Most garage door repair in Montgomery runs $135 to $540, and the exact number depends on the part that failed. A typical spring repair runs $160 to $305 per spring, while a cable repair runs $115 to $225 and roller replacement runs $100 to $200. Opener repair falls between $110 and $290, and a single panel replacement is $225 to $450. Track realignment, when the door has jumped the rails, runs $110 to $215.
What affects the price is the part, the door’s size and weight, and whether the failure damaged anything else on the way down. A snapped cable that bent a panel costs more than a cable alone. A door that’s been running rough for a year usually needs rollers and a tune-up together. We check all of that before quoting so the estimate reflects the whole job.
To avoid overpaying, ask for the estimate in writing before any work begins, and ask what’s included. A fair quote names the parts, the labor, and the total, and doesn’t grow after the fact. Our estimates are free, and the price you agree to is the price you pay. The written estimate sets the final price, and there’s no charge for coming out to look.
Our Service Area Near Montgomery
We cover garage door repair across Montgomery and the towns around it, including Pike Road, Redland, and Emerald Mountain to the east, and Millbrook, Prattville, and Coosada to the northwest. Wetumpka, Holtville, and Pine Level are within reach too. Same-day service is often possible when you call early, and we’ll give you a realistic window when you book. For a closer look at our Lakeside Garage Door Service coverage, or for garage door repair in Pike Road and garage door repair in Redland, we’re one call away.
Serving Montgomery, AL – Our Local Coverage Area
We serve Montgomery and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Repair in Montgomery
Garage door repair is fixing the parts of the door and opener system that have failed, rather than replacing the whole door. That covers springs, cables, rollers, panels, tracks, and the opener motor or logic board. Most repairs fix one failed component and restore the door to normal operation. If the door is beyond saving, we’ll tell you and price a replacement instead.
Most repairs take one to two hours on site, and common jobs like spring or roller replacement are often done in under an hour. If a panel or opener part has to be ordered, we’ll tell you the timeline up front and secure the door in the meantime. You’ll know what to expect before we leave the driveway.
Garage door repair in Montgomery typically runs $135 to $540, with spring repair at $160 to $305 per spring, cable repair at $115 to $225, and panel replacement at $225 to $450. The exact price depends on the part and any related damage. We give you a written estimate before work starts, and it’s free. Call (888) 688-3641 for an exact quote.
Yes, we service Clopay, Amarr, Wayne Dalton, and Raynor doors, along with LiftMaster, Chamberlain, Genie, and Craftsman openers. Our technicians work on the brand already on your home rather than a generic stand-in. That means faster diagnosis and fewer callbacks. If you’re not sure what you have, we can identify it on site.
Same-day service is often available when you call early in the day. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a call that comes in then gets booked into the next opening, Sunday through Friday, 7am to 7pm. When you call, we’ll give you a real window.
Warranty terms depend on the part and the job, and the technician will go over them with you before the work begins. We put the details in writing so there’s no confusion later. If something we fixed acts up, call us and we’ll take a look. Straight answers on coverage come standard on every job.
Clear the area in front of the door and the floor under the tracks so the technician has room to work. If you can, unplug the opener and leave the door down until we arrive. Make a note of any noises, jerks, or specific times the door misbehaves, since that helps speed up the diagnosis. And tell us the door and opener brands if you know them.
Schedule Your Garage Door Repair Service in Montgomery Today
A door that isn’t working right is a problem worth fixing today. Call (888) 688-3641 and we’ll get a technician out with a straight answer and a written price before any work starts. Our estimates are free, our technicians are licensed and insured, and our repairs run from $135 to $540 in most cases. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. For opener work or a full replacement, see garage door repair and our installation service. Let’s get your door back to working order.
Written by the team at Lakeside Garage Door Service.